Brand New for 2022! PalmSens’s new MultiEmstat4 builds on the success of the Emstat and MultiEmstat series. This new multichannel potentiostat includes 8 x Emstat4’s in a single compact package and each module now includes EIS and galvanostat. The channels can be operated independently or in synchronised, multichannel experiments using PalmSens’s MultiTrace Software. The system may also be used as a polypotentiostat: multiple WE’s vs one CE and RE.
Each channel is an independent Emstat4 potentiostat. Options are available for galvanic isolation (for “floating” operation. )
The MultiEmstat4 is available in either 8 channel or 12 channel versions and each of those is available in either High Range (HR) or Low Range (LR) versions. See comparison table below.
Voltammetric techniques:
Amperometric techniques:
Galvanostatic Techniques:
Pulsed techniques:
Other
Synchronizing channels in Synched mode
By enabling synchronization of channels and adjusting the setup of your cables, you can use the MultiEmStat4 as a polypotentiostat. This means you can use multiple working electrodes, one counter and one reference electrode in the same cell at the same time. Your working electrodes all perform the same measurement
| MultiEmstat4 | LR | HR |
|---|---|---|
| DC potential range | ±3V | ±4V |
| Compliance voltage | ±5V | ±8V |
| Current ranges (no. of ranges) | 1nA to 10mA (8) | 100nA to 100mA (7) |
| Maximum current | ±30mA | ±200mA |
| Electrode Connections |
WE, RE, CE and ground. 2mm banana plugs |
WE, RE, CE, Sense and ground. 2mm banana plugs |
| Hardware Options |
EIS to 200kHz Galvanic Isolation |
EIS to 200kHz Galvanic Isolation |
Copyright© 2024 All rights reserved